Characteristics of the upper and lower heating plates of the vulcanizer

The characteristics of the upper and lower heating plates of the vulcanizer:

1. The upper and lower heating plates of the vulcanizing machine are trinity, the structure is simple and easy to install.

2. The heating of the upper and lower heating plates of the vulcanizing machine is even. After entering the heat preservation stage for 10 minutes, the temperature difference between the points on the working surface is only ± 3 ℃ ～ 4 ℃, which exceeds the international standard.

3. The upper and lower heating plates of the vulcanizing machine are small in size, light in weight, reduced by half, low in energy consumption, and fast in heating. After heating, the whole plate surface is quite flexible, and it is closer to the adhesive tape than the conventional machine. The tightness is not greater than 0.03mm, and the general conventional machine does not have this performance.

4. One-time molding by vulcanization bonding or repair, the bonding parts are smooth and smooth, and the fastness is no different from the original tape.

5. The time from normal temperature to vulcanization temperature (145 ℃) is not more than 25min, the power is half that of the same industry at home and abroad, and the energy saving effect is good.

        For details, please consult Jiangyin Tongxin Vulcanizing Machine Factory
        Company website: www.txlhj.com

Vulcanizing machine, belt vulcanizing machine, conveyor belt vulcanizing machine, belt vulcanizing machine, vulcanizing machine factory, Jiangyin Tongxin vulcanizing machine factory