Use and maintenance of belt vulcanizer

1. When using the belt vulcanizer vulcanizer, be sure to read the "Instruction Manual" in detail, and follow the procedures specified in the manual during installation and operation.
 
2. The upper and lower electric heating plate electric heating and control box are made of various electrical components and various electrical instruments connected by wires. Therefore, during handling or use, it must be handled and placed gently to prevent strong vibration and excessive rubbing.
 
3. Before using the belt vulcanizer vulcanizer, be sure to check whether the electric heating elements in the electric heating plate are affected by moisture and insulate, otherwise it must be dried; whether the fastening screws and nuts of the Ali device are loose and leaky, otherwise they must be tight Whether the switches and instruments of the electric heating control box are flexible and reliable.
 
4. When vulcanizing and bonding in the open air, pay attention to wind and rain. After use, it should be cushioned with square wood, etc., and covered with a rainproof cloth to prevent damage from moisture and water.
 
5. When the vulcanizer of the belt vulcanizing machine is not in use, it should be placed in the air circulation, the relative humidity is not more than 85%, and it must not be in a warehouse affected by rain and snow; .
 
6. When the vulcanizer is not used for a long time, open the upper and lower heating plates before use, and dry the inside before use; in addition, tighten the tight screws and nuts of the pressure device firmly.