Scope and characteristics of various vulcanizing machines

The scope of application is: the separation between the covering rubber and the canvas and the covering rubber and the steel rope and canvas of various fabric cores and steel cord conveyor belts;
1. Before use, it is necessary to check the insulation resistance of the hot plate. If it is too low, it should be powered on and dried until the insulation value reaches below 50MPa before it can be used;
2. In the process of using and moving, it should be handled lightly and operated in a civilized manner;
3. If you are working in the field, you should have reliable rain and water proofing methods to avoid being affected by rain and damp.
4. When it is finished using its strengths, it should be placed in the air circulation, the relative humidity is not more than 85%, and it is not in a warehouse affected by rain.
5. Install the screw and tighten it.
6. Connect the power supply and the electric control box with a primary wire, connect the upper heating and electric control box, the lower heating plate and the electric control box with the secondary wire, and connect the upper heating plate and the electric control box and the lower heating plate with a temperature measuring element When connecting the cable to the electric control box, pay attention to the label on the electric control box.