Tape vulcanizing machine is easy to realize automatic temperature control

The belt vulcanizing machine is easy to realize automatic temperature control. The heating plate is made of general carbon steel plate. The heating plate converts electrical energy into thermal energy to heat objects, which is a way of using electrical energy.

The length of the vulcanization time of the vulcanizing machine must comply with the vulcanization effect when the positive vulcanization is reached. If the time is too short, it will cause under-sulfur, and if the time is too long, it will lead to over-sulfur.

Because the actual vulcanization time calculation is relatively time-consuming, each rubber belt manufacturer stipulates that the vulcanization time is not the same, and the vulcanization time has little effect on the on-site vulcanization bonding. Therefore, you can usually refer to the basic formula to calculate the approximate vulcanization time to control.