The hot plate temperature of the conveyor belt vulcanizer is even

The temperature of the hot plate of the conveyor belt vulcanizing machine is uniform. The machine is made of lightweight aluminum alloy material, which is small in size and light in weight. It is powered by a common three-phase power supply. The temperature of the hot plate is uniform. It is equipped with a smart, fully automatic LCD display temperature. The connection between the control box and the temperature control box and the host is made of an integrated plug-in and multi-core cable, which works reliably. At the same time, it has the characteristics of fast temperature rise, uniform temperature, good thermal efficiency, etc. It is an ideal glue bonding equipment for conveying mechanical rubber belt joints.
The quality of the tape joint directly affects the working efficiency and service life of the tape, especially the current long-distance, high-strength conveyor belt is more important. The "Shengda Weiye" brand SD-series electric heating tape vulcanizing machine is the current tape transportation Advanced auxiliary equipment in machinery.
Fault of judging vulcanization speed of belt vulcanizing machine
1. The curing time of the belt vulcanizing machine. This is an important factor affecting the vulcanization of the four-post tape vulcanizing machine. If the time is too short, the degree of vulcanization is insufficient (also known as under-sulfur). If the time is too long, the degree of vulcanization is too high (commonly known as oversulfur). Only suitable vulcanization degree (commonly known as positive vulcanization) of flat belt vulcanizing machine can guarantee the best comprehensive performance.
2. The vulcanization temperature of the belt vulcanizer. If the temperature is 10 ℃ higher, the curing time will be extended by about half. In order to ensure a relatively average vulcanization level, thick rubber products are individually heated gradually and high temperature for a long time.
3. The amount of sulfur in the belt vulcanizer. The greater the amount of sulfur used, the faster the vulcanization speed and the higher the vulcanization level that can be reached. The solubility of sulfur in rubber is limited, and an appropriate amount of sulfur will be precipitated from the surface of the rubber compound, commonly known as "sulfur spray". The amount of sulfur in soft rubber does not exceed 3% individually, the amount of sulfur in semi-rigid rubber is about 20%, and the amount of sulfur in hard rubber vulcanization conditions can be as high as 40%.