Precautions that should be understood before using the conveyor belt vulcanizer

The precautions that should be understood by the conveyor belt vulcanizer before use. Before use, the insulation resistance of the hot plate should be checked. If it is too low, it should be dried by electricity before it can be used until the insulation value reaches below 50MPa; It should be handled lightly and operated in a civilized manner; if you are working in the field, you need reliable rainproof and waterproof means to avoid being invaded by rain and damp; when you are finished, it should be placed in the air circulation, the relative humidity is not more than 85% In the warehouse that is not affected by rain, the sleepers are cushioned below, and it is strictly prohibited to place them on the ground.

Vulcanizing machine composition:

Vulcanizing machine is generally composed of four parts, a clamping mechanism, two control systems, three pressure systems, four heating systems

The clamping mechanism is generally composed of a frame and bolts, the control system is composed of an electric control box and a secondary wire, the pressure system is composed of a hydraulic pressure plate and a pressure test pump, and the heating system is composed of a heating plate and a heat insulation plate.

  working principle:

Vulcanization of rubber belt is a process from raw rubber to cooked rubber. In this process, the vulcanizer needs to provide pressure, temperature, and control vulcanization time. The vulcanizing machine satisfies this process, the pressure is provided by the frame and the water pressure plate, the temperature and the vulcanization time are controlled by the electric control box and the heating plate. Generally, the vulcanization temperature of ordinary domestic rubber belts is 145 degrees, the vulcanization pressure does not exceed 1.5 mpa, and the vulcanization time varies from 30 to 60 minutes depending on the tape.